TapStand panel customizer
Light
Make a logo panel for the TapStand NFC stand. Everything runs in your browser; your files are not uploaded anywhere.
Logo
Image (SVG, PNG or JPG; dark shape on a light or transparent background)
You can also drop an image anywhere on the page. No logo yet?
Try the example
or
download the starter SVG
, put your own artwork in it and upload it.
Width:
mm
Up / down
Threshold
Invert (use for a light shape on a dark background)
Remove logo
Text
Your text, one or more lines
Font
Poppins Bold
Noto Sans Bold (Greek, Cyrillic and more)
Upload a font (TTF or OTF)…
Letter height:
Up / down
Joined or right-to-left scripts (Arabic, Hindi…) are not shaped correctly; use a logo image for those.
Colours
Body
Detail
Shown in the preview and saved in the 3MF files as the two filament colours.
How to print it
With an AMS:
download
3MF for AMS
, load the body colour in slot 1 and the detail colour in slot 2, slice and print. The change at 4.2 mm is already in the file.
Without an AMS:
download
3MF with pause
. Start with the body colour; the printer stops at 4.2 mm. Switch to the detail colour, purge until clean, resume.
Any other slicer:
download the STL. Use 0.20 mm layers, 3 walls, 5 top and 4 bottom layers, 15% infill, no supports, and add a pause or colour change at
4.2 mm
yourself (Bambu Studio or OrcaSlicer: Preview, layer slider, right-click the +,
Add Pause
; PrusaSlicer:
Add color change
).
Download STL
3MF for AMS
3MF with pause (no AMS)
The 3MF files open in Bambu Studio with the 4.2 mm colour change or pause already set. They carry an A1 mini profile; pick your own printer when asked.